NoseGrind

1. Approach the ledge at a good speed. (Never slow!)
2. When you reach your ledge (a VERY slight angle), make sure that your front foot is near the 2 back bolts on the front truck.
3. Ollie high enough for the front truck to be a little bit above the ledge.
4. In the air, put pressure on the nose of the deck so that the board's front truck is on the ledge. Then push foward so that it will grind more easily.
5. When you are at the end of the ledge lean back just a little so you can get off of it and land.

**When you are grinding, you have to lean to towards the ledge. This will put pressure on the wheel that's on there and you will grind more smoothly.